The Apple Watch is a great wearable device and probably the best smartwatch out there. It has all the features you can ask for. The ability to send messages, receive calls, use Siri, install various apps, and even control your music playback.
Although the device is super useful, there are times when the simplest things can get boring. One of the major issues that a number of Apple Watch users face is when the Apple Watch keeps rebooting or restarting itself. In this guide, we will look at the various troubleshooting fixes that you can follow to fix Apple Watch that keeps restarting.
Methods to Fix Apple Watch Keep Restarting
Now, there are many reasons why your Apple Watch keeps turning off. This could be due to a software glitch, third-party apps causing a problem, or possibly the power button on your watch keeps being accidentally pressed while you’re wearing it. Regardless of the reason why the Apple Watch is restarting, there are a number of troubleshooting methods that can be applied if you are using an Apple Watch and are experiencing a similar restarting issue.
Method 1: Fit the watch to the wrist
If you notice your Apple Watch rebooting while you’re wearing it, chances are the Digital Crown is being pressed by your wrist. If this is your case, it is advisable to adjust the position of your watch as well as wear the watch a little higher on your arm. In this way, the digital crown will be protected against accidental presses and thus stop restarting or restarting itself randomly. However, if you have noticed that your watch restarts even when not worn, you may need to try the other troubleshooting methods mentioned below.
Method 2: Check for device updates
Another reason why your Apple Watch might restart is probably due to a software bug. In this case, it is better to check for available updates and install them immediately. You can follow two methods to update your Apple Watch.
Update with Apple iPhone
- Make sure your iPhone is updated with the latest software available.
- Now launch the Apple Watch app on your iPhone.
- In the app, tap the My Watch tab.
- Now tap on General followed by Software Update.
- If an update is available, download the update.
- You may need to enter the passcode from your Apple Watch or iPhone.
- The download will start. Make sure the Apple Watch is plugged into its power source.
- The Apple Watch will restart once the update process is complete.
Update using Apple Watch
If the Apple Watch you own is running on WatchOS 6 or newer, you will be able to update its software just by using the watch itself. Here’s how.
- Turn on your watch and plug it into the power source.
- Now you also need to make sure that your watch is connected to the wifi network.
- Tap General, then Software Update.
- The watch should now check for updates if available.
- If an update is found, the watch will download and install it.
- When the update process is complete, the watch should restart.
Now that your Apple Watch has been updated with the latest software available, this should fix Apple Watch that keeps turning off. But, if you still seem to have this problem after the update or if you find that no update is available for this device, you can try the next method.
Method 3: Restart Apple Watch and iPhone
The idea here is to restart your iPhone as well as your Apple Watch at the same time. It helps in a way that the two devices can reconnect after another restart and it might help the watch not to restart on its own. Follow these steps to restart your Apple iPhone and Apple Watch.
Restart Apple iPhone X and newer
- Simultaneously press and hold the volume and power buttons.
- You will see the power slider displayed on the screen.
- Drag the slider to restart your iPhone.
Restart Apple iPhones with the Home Button
- Press and hold the power button.
- Drag the slider across the screen to restart your Apple iPhone.
Restart your Apple Watch
- On the side of your watch, press and hold the power button.
- Drag the Power off slider on the screen.
- Now, with your Apple Watch turned off, press and hold the button again until the Apple logo appears on your screen.
Force Restart Apple Watch
This method can be used to force restart your Apple Watch. All you have to do is press the side button and the digital crown for 10 seconds. You can release the buttons when the Apple logo appears. Even after forcefully restarting and rebooting the Apple watch, you still face this problem, you can proceed to the next steps.
Method 4: Unpair and reconnect Apple Watch with iPhone
The other way to solve this problem is to unpair and re-pair these devices with each other. Follow these steps to unpair and pair again.
Unpair Apple Watch
- Turn on both devices and keep them side by side.
- Launch the Apple Watch app on your iPhone.
- Tap the My Watch tab and select All Watches.
- You will now see your watch on the screen. Tap the small icon that contains the lowercase i.
- An option to unpair the watch will appear. Press it.
Pair Apple Watch
- Install the Apple Watch app on your iPhone. Also, make sure the iPhone is running the latest software available.
- Enable Bluetooth and WiFi on your iPhone.
- Now turn on your Apple Watch and keep it close to your iPhone. Your iPhone will now detect the Apple Watch.
- You can tap Confirm on the message that appears on your iPhone.
- Now the iPhone will ask you to pair with the Apple Watch. Simply place the iPhone camera viewfinder on the Apple Watch.
- In a few moments, the Apple Watch will now be paired with your iPhone.
- You can choose to set it up as a new watch or choose to restore it from all available backups.
- Finally, sign in with your Apple ID and choose the settings, features, and other adjustments you want to make.
Now that you’ve set up your Apple Watch with your iPhone, there shouldn’t be any issues like restarting. If the problem persists, you may need to reset your Apple Watch.
Method 5: Reset Apple Watch
If none of the above steps helped to fix the Apple Watch restarting issue, it’s time to reset the Apple Watch. Here are the steps to reset your Apple Watch. You can reset or erase your Apple Watch without using your iPhone.
- Open the Settings app on your Apple Watch and tap General.
- Select Reset, then Erase All Content and Settings.
- The watch will ask you to enter the password.
- It will now ask you if you want to erase all data. Tap Erase everything.
- The watch will erase all data and begin to reset.
- You can pair the watch again by following the steps mentioned above.
Method 6: Uninstall third-party apps
Sometimes certain third-party apps that you have installed on your Apple Watch can cause your watch to restart. Here’s how you can uninstall apps from your Apple Watch.
- Press the digital crown on your Apple Watch.
- All installed apps will now be displayed on your watch screen.
- If your apps are displayed in grid view, long press the app.
- App icons will enter jiggle mode.
- Now tap the X icon of the app you want to remove.
- Choose Delete App to uninstall it from your Apple Watch.
- If apps are displayed in a list view, all you have to do is swipe left on the app you want to remove.
- Hit the delete button and the app is now removed from your Apple Watch.
Method 7: Revert to Default Watch Face
If you use a watch face with too many options enabled, the device may use too many resources and your Apple Watch may restart at the same time. Sometimes third-party watch faces can also be the cause of such issues. So follow these steps to get back to the default watch face on your Apple Watch.
- Press the digital crown on your Apple Watch.
- You will now see the current watch face that has been configured.
- Now just swipe left or right to choose the watch face which is either default or a watch face that has almost nothing on the screen.
- Once you find the right watch face, tap on it. It will now be configured as a watch face for your Apple Watch.
Method 8: Reset iPhone
Now, even if after performing all the troubleshooting steps above you still have a problem, there is a possibility that your iPhone is at fault. So, the best you can do is to perform an iPhone reset. Here’s how you can do it.
- Take a backup of your data before the reset process.
- Launch the Settings app on your iPhone and tap on General.
- Then you need to select Transfer or Reset iPhone.
- Now choose Erase All Content and Settings.
- The reset process will now begin and all data on your iPhone will now be erased.
- Once the iPhone restarts, you can set it up and then pair your Apple Watch to it.
And this is how you can fix the Apple Watch keeps restarting issue. Even after performing all the steps above, your Apple Watch still behaves the same, it may be best to bring it to Apple Service Center and have it inspected. Even better, if you have warranty or Apple Care, you would be eligible to get a new device or have it repaired for free at no additional cost.
Want to learn more about iOS 16? Here’s a new video about Apple’s upcoming operating system for the iPhone.